building-a-picket-fence

Image credit: Kevin Harper

If you are pondering on building a picket fence on an uneven grown, you should find this task do-able. Since, this article will give you a comprehensive insight through on what is needed to build a picket fence for your home. There are many interesting artifacts that would add more glamor and color to your priceless homes. One such element would be a welcoming White Picket Fence.

Over the past few years, more and more people are designing stylish picket fences for their homes. Of course, a properly built fence would add more charm, beauty and lines of perfection to your house. Additionally, the trendy structure will make sure your home receives a modicum level of security. With all this being said, how long and what would it take to build a picket fence?

10 Steps to Building A Picket Fence On An Uneven Ground

These 10 steps should get you started, and making your building project a lot easier. Building a picket fence is actually pretty simple, once you’ve got a basic idea of where to start.

Step #1 – Befriend a Local Inspector or Authority

Before you build a picket fence, you must call over local authorities or inspectors. You must make sure the ground does not have any buried water pipes or utility lines. This is because strong pickets require lots of digging and burring! Sometimes, you may end up breaking important lines and wires around your house.

As you approach an experienced inspector, you will know where these utilities are. Additionally, you must be aware of the crucial components in a picket fence. This en-covers over essential parts like the “Picket”, “Top Rail”, “Bottom Rail”, “Post Cap” and “Mortises”.

Step #2 – Digging Holes

Secondly, you must dig the very first post for your picket fence. This hole must be at least 10 inches in diameter and predominantly deep. According to experts, the overall strength of your fence will depend on how deep this hole is. As mentioned previously, make sure you don’t break pipes and wires, while digging this hole.

Some people tend to excavate up to 32 inches with customized Gibbs Posthole Diggers. These holes can maintain a diameter of at least 10-inches down the way. Try to discard any lose stones or rocks during this process.

Step #3 – A Firm Post

Now, set up a firm post in this huge hole. In case the post comprises of mortises, you should adjust its height accordingly. The lowest picket should be between 3 to 7 inches above ground level. Conversely, add at least 8 inches of soil to cover up the hole.

Use a level to identify if the post is held upright in the hole. Once you feel that the post is steady and plumb, compact the soil around it. Tamping the bar would compact the soil and give the post a firm base. Repeat this step till the hole is completely filled with firm soil.

Step #4 – Proper Placement

Next, you must identify where the next post should be. The distance between posts should be measured from the very first one. Also, bear in mind that a stake should be driven into the ground. To make the post as tight and strong as possible, you should wrap a tight line around it. You can identify discreet positions for the post using small screws.

At this mark, you should dig a 10-inch posthole and fix the next post. This step should be repeated till you cover the entire boundary of your house!

Step #5 – Assembling Panel Rails

The very next step involves the assembling of panel rails. This is a very important step that should determine the stability of your picket fence. The panels can be propped up using wood wedges. These wedges should be adjusted just-above ground level. If the post does not have any mortises, you must prop the structure carefully; such that the lower surface of the picket is off ground and the top most rails are perfectly leveled. If the pickets are too far (between 3 to 7 inches), you must proceed onto step #6.

Step #6 – Racking Panels

Moving on, you must rack the panels of your fence. The panels should be vertically lifted and dropped carefully on a wooden block or the ground. The panel has to be turned end-for-end. This will make sure the picket fence is laid in the right spot. The procedure should be continued till you cover all the ends. The free ends of your picket fence must be propped up using wooden wedges.

In case the fence doesn’t fall in place, you should lift it and re-position them vertically. This is a tacky chore that should (could) be done with the help of experienced fence builders.

Step #7 – Attaching Panels

As the panels are laid in-position, you should attach them together. This is a tedious task that should be done perfectly. Once you attach two panels together, move onto the next ones. The holes should fall in line for a clean finish. Secure the holes at a distance of 2 ½ inches. These steps must be carried out till the entire fence is laid & completed perfectly.

Step #8 – Gate Posts

As the posts are laid in position, you must setup the gate posts. These posts will have separate panels, which must be installed one-after-the-other. When you install gates, add 1 ½ inches to the gate’s actual width.

Conversely, dig holes for the next gate panel. Once the gate posts are planted firmly; you must fill, tamp and compact the soil layer. Double check if posts are equally spaced between each other. Additionally, it must be in level with one-another. At all times remember that the panels and gate posts should be as stable as possible.

Step #9 – Gates and Doors

Now, you must hang the gate and screw its hinges. Meanwhile, don’t forget to verify if the gate swings freely and has no wedges. To add more panache to your picket fence, you must attach nail caps to the post tops. This will give your shed a complete look.

Step #10 – Painting Your Shed!

To increase the actual lifetime of your shed, you should paint it! White picket fence will be a delight to see and enter through. Moreover, well-painted fences will last for a very long time. They require nominal maintenance and can be re-modified effortlessly.