Image credit: metneer_man

According to experts, DIY garage storage cabinets can be treated as an art that revolves around a few feasible steps. One can build a functional garage cabinet in just two to four days. And, they will undeniably be happy with the job accomplished. When compared against conventional cabinets that require dados and rabbets, garage cabinets are built in an atypical manner. In simpler terms, the cabinets require a little more effort so that they stay strong and look good. In the next few lines, you will get a comprehensive insight into eight steps that will brief you on how to build garage cabinets using Do It Yourself strategies.

Simple DIY Steps on Building Garage Storage Cabinets for Dummies

First time builders can often feel like dummies, and lost in what they’re doing. Making crucial mistakes can set back costs of building your storage cabinet. But luckily, these eight steps outlined down below are sure to give you a helping hand.

Step #1 – Design the Cabinet’s Highlight

Firstly, you should design the cabinet’s highlight. In most cases, DIY Garage Storage Cabinets are framed to be hung on walls. This would give the homeowner more space for cleaning. Additionally, more storage space will be obtained when you hang items on the wall. The garage cabinet would comprise of 3 normal doors and an upper sliding one. The sliding door should be used in conjunction with the garage door rails. A simple DIY garage cabinet would have 3 fixed shelves and several adjustable ones. These adjustable shelves will let you rearrange the style of storage in your cabinet.

Step #2 – Designing Cabinet Shelves and Carcass

Secondly, you should decide on the right kind of materials for the cabinet shelves and carcass. Over the past few years, plywood is regarded as the best material for garage cabinets. It would be an amazing idea to obtain factory edged plywood. Such products are void of imperfections and rough surfaces. To be more precise, you can handle plywood easily.

Similarly, you must get hold of handy edge sanding blocks. These blocks should be used to remove sharp edges and unnecessary burrs. Sanding blocks will make sure the plywood boards are easy to handle. And, the simplest way to create shelves would be by making boxes.

Step #3 – Constructing Cabinet Boxes

Now, you should construct the cabinet boxes. Plywood should be sanded before you begin cabinet construction. The steps in designing cabinet carcass are exceptionally similar to the procedure in designing cabinets in walk in wardrobes. Initially, you should use the notches for clean French Cleat mounting. The plywood strips should be laid wide, so that there is plenty of room for installation. Always remember that the plywood’s good face should act as the interior side.

Conversely, adjustable shelf holes should be drilled into the board. Before proceeding onto the next step, it would be wise to paint these side panels. Some people tend to paint and then drill holes. This is because pins wouldn’t fit into holes that are filled with paint.

Step #4 – Align Your Cabinet

As you align the shelves in your cabinet, stick to the following routine:

• Apply strong glue on the joint surface.
• Make use of brad nailers to prevent the joints from slipping. The nailer would keep the boards together.
• Use bar clamps and corner clamps to apply sufficient amounts of pressure on the joints.
• Drill holes and sink the two boards together. Sometimes, you should count sink the holes for more strength.

Step #5 – Finishing the French Cleats

According to experts, there are two different types of “Finishing” in DIY garage cabinet procedures. The first one gets completed once the French Cleats are built properly. The cleats require 45 degree bevel angles and 4×4” plywood strips. The plywood strips should be glued or screwed to the back of the cabinets.

Consequently, paint the surface so that you don’t shade the driveways unnecessarily. Now, you will have nice looking cabinet carcasses that are ready to be installed almost anywhere! Once the cabinets are done, a major portion of work will be removed from your shoulders.

Step #6 – Constructing Shelves

The very next step revolves around the construction of “Shelves”. This project will produce lots of plywood pieces. These pieces can be used to design and build shelves. Before moving on, you should decide on the right number of shelves for your cabinets. Statistically, 4×8 plywood sheets that are 2.5” wide and 9” long will produce three 31.5” sections. Eight such pieces can be used to make the middle shelves. Usually, the top surface will not require any reinforcement.

However, the bottom shelves should be framed and reinforced separately. The cut pieces should be coated smoothly and glued together properly. Always remember that both the back and from surfaces should be painted.

Step #7 – Installing Shelves

Installation of shelves will require some time. First of all, measure the height of the cabinet’s French Cleat. Based on this distance, you should position the lower cleat strips. The strips should be mount using wall studs. If required, you can drill holes on these strips and screw them at the predestined location.

The side panels should be held together using tight clamps. Use 1” screws to make sure the cabinets are secured together tightly. When you align the shelves, you should verify if the panels make a square. This is a very critical step that will have a major impact on how the door fits in your garage cabinet.

Step #8 – Building Cabinet Doors

Moving on, you should build the DIY garage storage cabinet doors. All doors will be of the same size. A gap of 3/16” should be left between each door. The small gap will give the structure a good reveal. The plywood doors should be primed before you cut them. This will make painting easy and effortless. Likewise, soften the plywood edges to make sure they don’t break while assembling.

Additionally, it will be quite difficult to paint plywood boards with sharp edges. Once you paint and cut the plywood doors, you should screw them onto the cabinets. During this stage, the corners and edges must be flushed. Then, you should use clamps to glue the doors onto the cabinet securely.

This concludes the DIY Garage storage cabinet construction steps!