Image credit:evelynbelgium

Horses are amazing creatures with lots of energy, strength and panache! The alluring animals will definitely add more value to your property. However, the act of housing horses is easier said than done! Just like humans, horses tend to demand for an idealistic home. Horses deserve to the absolute best living conditions. Housing plays a very important role in the care taking process. Luckily, the venture is not difficult or expensive as it sounds. Horses have survived several thousand years without man made shelter or feeds; thus, anything you provide them will be an add on bonus. And, the Run In Shed you plan must comprise of certain features that would delight the horse!

Horse Run In Shed Plans in 10 Simple Steps

Horses are one of God’s beautiful living creatures. They must be cared for, and what better way than setting up the perfect shed for them to have adequate living conditions. These are 10 steps that can help set up your horse for the proper living conditions of a nicely build shed.

Important Materials for a Horse Run In Shed

To build a horse run in shed, you must get ahold of these 10 important materials that I have listed here. This list of materials includes saws, levels, metal siding, measuring tapes, cement, roofing nails, screws, 2 x 4 lumber, post hole digger (auger) and spray paint. These are affordable pieces of equipments that can bought from any hardware store! However, remember that the list is endless and based on your horse run in shed plan, the quantity and type of materials included would vary drastically.

Step #1 – Choose a Good Location for the Shed

The very first decision to be made while building any kind of shed would be the location. And, the run in shed is meant for the horse. Thus, it has to be located in a calm and clean environment. Make sure there are plenty of green trees and lawns around the shed. Once you find a perfect spot for the shed, you must level the floor area. Compacting and leveling will require some time. So, try to get hold of professional assistance during this step.

Step #2 – Choose a Perfect Size for the Shed!

Next, you must measure the shed’s area. Do you wish to design a shed for a single horse or several fellows? Should the shed have storage space? Do you want this shed to be expandable? These are simple questions that will help you mark the shed’s area and corner posts. Use spray paint to mark these junctures. Also, every 12-feet gap must be identified using a brace post or corner. These posts can be used for stability.

Step #3 – Digging Holes for Poles

Now, it’s time for some digging! Use a post hole auger or digger to dig deep holes for the brace posts (corners). According to experts, the holes must be at least 20 inches deep. If the run in shed plans are meant for many horses, you should dig at least 30 inch holes. The overall stability of your shed will depend on the depth of the holes.

Step #4 – Arranging Poles

As you dig the holes, you should place the 4×4 posts in them! Placement might seem easy and effortless. However, this is one of the tackiest tasks in the entire list. The posts should be spaced and placed properly. For instance, each post in the run in shed must be around 10-feet far apart from one another. This is because there should be plenty of room for the horses to stand and move. Horse run in sheds with close poles will make life difficult and uncomfortable for the horse.

Step #5 – The Cement Mixture

Once the 4×4 posts are positioned, you should mix cement and pour them into the deep holes. The cement mixture should be consistent and apt for its purpose. Always bear in mind that the poles should stand through tough times! While pouring the cement mixture, verify if the posts are straight and leveled. Additionally, the cement mixture should be allowed to set for at least 72 hours. Well set cement will increase the lifetime and stability of your run in shed.

Step #6 – The Corner Posts

Once the cement mixture solidifies and reaches a stable composition, you must create frames for the shed. The frames can be made by hammering 2×4 posts from one corner post to the other brace (or corner post). The frames must be secured using strong nails. These posts should be placed at ground level too. To be more precise, the posts must be approximately 4 feet above ground level.

Step #7 – The Shed’s Picture Perfect Frame

Conversely, siding should be attached to the frame. You can make use of standard nails to do this attachment. Always make sure pieces overlap with one another to keep water away. This is an interesting trick that will increase the lifetime and strength of your horse run in shed.

Step #8 – Safeguarding Horses

As the frame gets fixed, you should fill the ground frame and middle frame board inside the shed using 2x4s. These portions will create walls in the run in shed. In fact, the so called walls would prevent horses from injuring themselves by kicking through the siding.

Step #9 – The Roof

Now, it’s time to focus on the shed’s roofing plan. Initially, make a framework for the roof using 2x4s. The framework should cover the entire front section of the horse run in shed. To be precise, the 2x4s must cross through the middle, back and front end. Attach the framework to the corner posts or brace posts using standard nails. Once the framework is done, you should attach the siding to it! Make use of high quality roofing nails while attaching the siding to the framework. As mentioned previously, overlap patterns and sections of the frame to make it water proof, secure and stable.

Step #10 – The Finishing Touch

Finally, the roof has to be secured onto the main framework using roofing nails and screws. This will give your shed a solid and sturdy look. Always remember to use extra nails! As the structure gets pulled together by many strong nails, it will become stronger and last longer.

Building horse run in sheds can be treated as a challenging and interesting task! The process revolves around many simple decisions that would determine the overall lifetime and stability of the structure.