lean-to-shed-plans-that-is-easy

Image Credit: DrunkDriver

Lean to shed plans is a do it yourself project that can be complicated without a thorough guide to help you. By definition, a lean to shed is an outdoor structure that stores equipments and housing tools. To be more specific, the lean to sheds can be used to store special kinds of landscaping materials like lawnmowers and rakes. Conversely, the effective structure requires lots of thought and effort while construction.

You should put together a perfect lean to shed plan for a long lasting structure. And, this task can be a bit complicated for those that aren’t very experienced with building sheds. Unlike many other shed plans and backyard lawn units, the lean to shed plan may have only a plan view. Technically, this is also known as the top view plan. A sophisticated lean-to-shed plan may have details about its front, left and right side. Well, if you are hunting for free lean to shed plans, you will understand the secret behind my words.

Free Lean to Shed Plans That Can be Nailed Easily!

Are you ready to start your building process? With the right materials, and a easy to read shed plan, you should be able to get through this process on your own. This can be done easily, but you might need to take your time to ensure you’re doing this the proper way. So don’t hesitate to the read this guide two, three, or even four times.

The Right Mix-Mash of Materials

To build a picture perfect lean to shed, you should make use of certain things. The materials that are needed include over ledger boards (2×4 and 2×6), tape measures, hammers, circular saws, 1-by-4 inch strip sheaths, long screws, corrugated metal roofing, screw guns, galvanized (aluminum) plastic washer tops, clear silicone caulks, levels, framing nails, metal drip edges, metal flashings, metal saws, tin snips and many nails.

Three Important Sides

To begin with, you should design three sides of the lean to shed. These sides must be planned against the
building façade. Conversely, the building façade would form the 4th side of the lean-to-shed plan. Usually, the shed should be at least 16 feet wide and 8 feet long. The shortest side of the lean to shed plan must be 8 feet high! If you want a shed that is much taller, you should stick onto a 10 feet tall structure. Anything above this figure will seem meaningless. So, think twice before you plan the shed’s dimensions. Meanwhile, remember that the budget of your shed will depend (partly) on its size.

A Perfect Base

Secondly, you should construct a base for the lean to shed. The base must be made of solid materials like flooring concrete. The shed’s walls must be placed over these concrete blocks. Roughly, concrete should be poured at least 8-inches below ground level. And, the walls must be laid over concrete and allowed to rest for at least 24 long hours. Unset concrete will result in an unstable structure. So, think twice on how long concrete is allowed to settle. To increase the structure’s strength and durability, you should combine concrete with small pebbles. In fact, you can add small pebbles once the shed gets constructed completely.
The 4th Facade

Now, it’s time to frame the lean to shed’s façade. This is a very important step that has to be accomplished with lots of care and concern. To form the shed’s façade, you must cut the 2×4 boards using the circular saw. As mentioned previously, the boards should be at least 6 feet high and at most 8 feet tall. Moving on, the boards should be nailed onto a bottom board. Technically, the bottom board is also known as the sill plate.

The bottom board should be placed on a flat surface. This is an important part of framing. The board’s outer structure should be marked using pencil on the sill plate. These markings will help you install the studs. Consequently, nail the sill plate onto the outer board and leave room for the door opening.

Lean to Shed Roofing

Moving on, the roof has to be positioned appropriately. The roof rafters should be at least 10 feet above ground level. And, the rafters must be sloped at an angle of 30 degrees. In addition to these rafters, you must install header boards securely. To create the slope and roof rafters, the rafter boards must be cut using a circular saw. Generally, experts tend to use 2×4 boards for the roof rafters. To secure the rafters on the header boards, 4-inch nails and 16-inch centers must be used. If possible, enclose the roof’s exterior surface using asphalt shingles and nail tar paper.

Many lean to shed plans make use of corrugated metal roofing materials. These materials would cover and protect the roof in the long run. While using corrugated metal roofs, you should remember to following steps:

• Firstly, choose an idealistic end for the panel. The panel must be secured carefully on the sheathing strips.

• Use galvanized aluminum screws or steel screws (based on the roofing material) to attach the panel and sheathing strips together. The screws must flow and reach the corrugated panel. However, make sure the screws don’t come in touch with panels that overlap.

Similarly, you should decide on appropriate kinds of flooring for the lean to shed! The process of choosing a good flooring material is definitely easier said than done. This is because there are too many options to choose from. Just like every other feature in the shed, flooring must be designed to last for a long time. Conversely, you should opt for materials that would suit the shed’s purpose and the surrounding climate. This brings to end a very important step in the lean to shed building plan.

The Final Touch!

Finally, you must complete the lean to shed plan by coating it with the right kind of paint. You can use different types of sealants and primers to prevent moisture from seeping into the structure. According to experts, lean to sheds must be protected from moisture and humidity. These are mighty villains that can result in adverse effects like rotting!

On the whole, you can build a lean to shed in few short days. With a little bit of thought and ingenuity, you can pull together a perfect structure next to any lawn, garage or barn! However, the lean to shed plan must be customized in accordance with your needs & wants. The stand alone structure should be simple and properly built. It should be structured to stand against all odds and tremors.